The AKITA Dominus. This is not a gaming machine. But it is quite a server for the money. Can be used for a variety of server roles. We've used them in this configuration 24/7 full load for months at a time. It runs strong around 70C under 100% load. Your environment may affect this. The 2U version is not loud at low and medium loads but under full load you can hear it, and it's meant for that type of environment. The 7B12 model is a $100 less. The 7B12 runs equal to the 7742 but pulls a little more energy and runs 1 to 2 degrees warmer. We also offer a large tower version that can house many 3.5" bays and mid tower version with very little internal drive support. Please message the seller if you have interest in a different model variation or configuration. The machine can be sent clean or other OS installations can be discussed. Does not have native TPM 2.0 support. The server and BMC are still Windows 10/11, Linux (tested on Ubuntu 24.04 LTS) environment compatible. Message seller with any questions.
2U AMD EYPC 7742 or 7B12 (64 core/128 thread) server processor (single)
128GB EEC 2933 Samsung
GT 610 dedicated graphics
256 GB NVME
w/BMC module installed
Dynatron A38 Aluminum CPU Cooler
Corsair CX750M P/S
5x80mm fans
Additional Specs
Support for up to 2TB of memory
Support for 8-channel memory
Supports ECC DDR4 3200/2933/2666/2400/2133MHz speeds (depending on the CPU)
4 x SATA 3.0 (6Gbps) ports (hot swap)
3 x SFF-8643 ports, which can be configured for up to 12 additional SATA 3.0 ports or 3 U.2/PCIe 3.0/4.0 x4 drives (hot swap)
4 x PCI Express 3.0/4.0 x16 slots
3 x M.2 2280 NVMe slots (in addition to the SATA/U.2)
4 x USB 3.2 Gen1
2 x USB 2.0
2 x RJ45 Intel I226V 2.5G network ports
1 x 2-pin audio jack
1 x VGA and RJ45 port for IPMI (requires BMC module for use)
DEBUG diagnostic card LED screen
21.5"x17"x3.5"
These servers take about 1.5 minutes to boot with the BMC and approx 2 minutes without the BMC. As most Epyc machines do take longer due the memory training that is completed every reboot. It takes 4-5 minutes if you change the memory config the first time.
"This Akita Computer is warranted to the original purchaser to be free from defects in material or workmanship for a period of ninety (90) days from the date of the original purchase. This warranty covers the repair or replacement of the defective part at the seller's discretion. This warranty does not cover defects or damage due to improper installation, misuse, or normal wear and tear, tampering, or removal of asset tags. Labor charges are not included under this warranty".
Akita Computing can custom build a large variety of machines for many applications if you are interested. Everything from video compression, AMD EPYC crypto mining machines, GPU mining rigs, and rack servers with multi drive raid array setups. Message seller with all questions... we install Linux and Windows environments..
The AKITA Dominus. This is not a gaming machine. But it is quite a server for the money. Can be used for a variety of server roles. We've used them in this configuration 24/7 full load for months at a time. It runs strong around 70C under 100% load. Your environment may affect this. The 2U version is not loud at low and medium loads but under full load you can hear it, and it's meant for that type of environment. The 7B12 model is a $100 less. The 7B12 runs equal to the 7742 but pulls a little more energy and runs 1 to 2 degrees warmer. We also offer a large tower version that can house many 3.5" bays and mid tower version with very little internal drive support. Please message the seller if you have interest in a different model variation or configuration. The machine can be sent clean or other OS installations can be discussed. Does not have native TPM 2.0 support. The server and BMC are still Windows 10/11, Linux (tested on Ubuntu 24.04 LTS) environment compatible. Message seller with any questions.
2U AMD EYPC 7742 or 7B12 (64 core/128 thread) server processor (single)
128GB EEC 2933 Samsung
GT 610 dedicated graphics
256 GB NVME
w/BMC module installed
Dynatron A38 Aluminum CPU Cooler
Corsair CX750M P/S
5x80mm fans
Additional Specs
Support for up to 2TB of memory
Support for 8-channel memory
Supports ECC DDR4 3200/2933/2666/2400/2133MHz speeds (depending on the CPU)
4 x SATA 3.0 (6Gbps) ports (hot swap)
3 x SFF-8643 ports, which can be configured for up to 12 additional SATA 3.0 ports or 3 U.2/PCIe 3.0/4.0 x4 drives (hot swap)
4 x PCI Express 3.0/4.0 x16 slots
3 x M.2 2280 NVMe slots (in addition to the SATA/U.2)
4 x USB 3.2 Gen1
2 x USB 2.0
2 x RJ45 Intel I226V 2.5G network ports
1 x 2-pin audio jack
1 x VGA and RJ45 port for IPMI (requires BMC module for use)
DEBUG diagnostic card LED screen
21.5"x17"x3.5"
These servers take about 1.5 minutes to boot with the BMC and approx 2 minutes without the BMC. As most Epyc machines do take longer due the memory training that is completed every reboot. It takes 4-5 minutes if you change the memory config the first time.
"This Akita Computer is warranted to the original purchaser to be free from defects in material or workmanship for a period of ninety (90) days from the date of the original purchase. This warranty covers the repair or replacement of the defective part at the seller's discretion. This warranty does not cover defects or damage due to improper installation, misuse, or normal wear and tear, tampering, or removal of asset tags. Labor charges are not included under this warranty".
Akita Computing can custom build a large variety of machines for many applications if you are interested. Everything from video compression, AMD EPYC crypto mining machines, GPU mining rigs, and rack servers with multi drive raid array setups. Message seller with all questions... we install Linux and Windows environments..
